This is the latest recevied telemetry packets stored in our database for station/object OR7F-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758174309 | 15 Nr | 12.64 Vdc | 17.12 deg.C | 59 % | 0 |
| 1758174009 | 14 Nr | 12.64 Vdc | 17.16 deg.C | 59 % | 0 |
| 1758173709 | 14 Nr | 12.64 Vdc | 17.24 deg.C | 59 % | 0 |
| 1758173409 | 14 Nr | 12.64 Vdc | 17.32 deg.C | 59 % | 0 |
| 1758173109 | 14 Nr | 12.64 Vdc | 17.2 deg.C | 59 % | 0 |
| 1758172809 | 14 Nr | 12.64 Vdc | 17.2 deg.C | 59 % | 0 |
| 1758172209 | 10 Nr | 12.64 Vdc | 17.14 deg.C | 60 % | 0 |
| 1758171909 | 10 Nr | 12.64 Vdc | 17.08 deg.C | 60 % | 0 |
| 1758171609 | 10 Nr | 12.64 Vdc | 17.06 deg.C | 60 % | 0 |
| 1758171309 | 10 Nr | 12.64 Vdc | 17.06 deg.C | 60 % | 0 |
| 1758171009 | 9 Nr | 12.64 Vdc | 17.08 deg.C | 60 % | 0 |
| 1758170709 | 9 Nr | 12.64 Vdc | 17.16 deg.C | 60 % | 0 |
| 1758170409 | 9 Nr | 12.66 Vdc | 17.24 deg.C | 60 % | 0 |
| 1758170109 | 9 Nr | 12.64 Vdc | 17.3 deg.C | 60 % | 0 |
| 1758169809 | 9 Nr | 12.64 Vdc | 17.36 deg.C | 60 % | 0 |
| 1758169509 | 9 Nr | 12.64 Vdc | 17.46 deg.C | 60 % | 0 |
| 1758169209 | 9 Nr | 12.64 Vdc | 17.58 deg.C | 60 % | 0 |
| 1758168909 | 10 Nr | 12.64 Vdc | 17.72 deg.C | 60 % | 0 |
| 1758168609 | 9 Nr | 12.64 Vdc | 17.88 deg.C | 59 % | 0 |
| 1758168309 | 9 Nr | 12.64 Vdc | 18.08 deg.C | 59 % | 0 |
| 1758168009 | 9 Nr | 12.66 Vdc | 18.28 deg.C | 59 % | 0 |
| 1758167709 | 10 Nr | 12.64 Vdc | 18.5 deg.C | 58 % | 0 |
| 1758167409 | 9 Nr | 12.66 Vdc | 18.68 deg.C | 58 % | 0 |
| 1758167109 | 9 Nr | 12.64 Vdc | 18.82 deg.C | 58 % | 0 |
| 1758166809 | 9 Nr | 12.64 Vdc | 18.9 deg.C | 58 % | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 0.01, 0
Value3: 0, 0.02, -50
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)