This is the latest recevied telemetry packets stored in our database for station/object SR9BBC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758162802 | 73 Count | 664 Count | 50 Count | 4.1 VDC | 0 VDC |
| 1758161900 | 68 Count | 604 Count | 46 Count | 4.1 VDC | 0 VDC |
| 1758160999 | 62 Count | 540 Count | 42 Count | 4.1 VDC | 0 VDC |
| 1758160098 | 56 Count | 479 Count | 38 Count | 4.1 VDC | 0 VDC |
| 1758159197 | 49 Count | 425 Count | 33 Count | 4.1 VDC | 0 VDC |
| 1758158296 | 40 Count | 364 Count | 27 Count | 4.11 VDC | 0 VDC |
| 1758157395 | 34 Count | 302 Count | 23 Count | 4.1 VDC | 0 VDC |
| 1758156494 | 28 Count | 247 Count | 19 Count | 4.1 VDC | 0 VDC |
| 1758155593 | 21 Count | 189 Count | 14 Count | 4.1 VDC | 0 VDC |
| 1758154691 | 12 Count | 129 Count | 9 Count | 4.11 VDC | 0 VDC |
| 1758153790 | 6 Count | 68 Count | 5 Count | 4.11 VDC | 0 VDC |
| 1758152889 | 106 Count | 1049 Count | 67 Count | 4.11 VDC | 0 VDC |
| 1758151988 | 100 Count | 996 Count | 63 Count | 4.12 VDC | 0 VDC |
| 1758151087 | 93 Count | 942 Count | 59 Count | 4.12 VDC | 0 VDC |
| 1758150187 | 86 Count | 884 Count | 55 Count | 4.11 VDC | 0 VDC |
| 1758149286 | 80 Count | 814 Count | 51 Count | 4.1 VDC | 0 VDC |
| 1758148385 | 74 Count | 760 Count | 47 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)