This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758147084 | 760 Count | 220 Count | 155 Count | 0 VDC | 3.82 VDC |
| 1758146479 | 757 Count | 217 Count | 153 Count | 0 VDC | 3.82 VDC |
| 1758145874 | 754 Count | 215 Count | 151 Count | 0 VDC | 3.82 VDC |
| 1758145268 | 752 Count | 213 Count | 150 Count | 0 VDC | 3.82 VDC |
| 1758144663 | 749 Count | 210 Count | 148 Count | 0 VDC | 3.82 VDC |
| 1758144057 | 747 Count | 209 Count | 147 Count | 0 VDC | 3.82 VDC |
| 1758143452 | 745 Count | 207 Count | 146 Count | 0 VDC | 3.82 VDC |
| 1758142847 | 741 Count | 204 Count | 143 Count | 0 VDC | 3.82 VDC |
| 1758142241 | 738 Count | 202 Count | 141 Count | 0 VDC | 3.82 VDC |
| 1758141636 | 736 Count | 200 Count | 140 Count | 0 VDC | 3.82 VDC |
| 1758141031 | 732 Count | 196 Count | 137 Count | 0 VDC | 3.82 VDC |
| 1758140425 | 729 Count | 194 Count | 135 Count | 0 VDC | 3.82 VDC |
| 1758139820 | 726 Count | 192 Count | 133 Count | 0 VDC | 3.82 VDC |
| 1758139214 | 722 Count | 186 Count | 130 Count | 0 VDC | 3.82 VDC |
| 1758138609 | 719 Count | 176 Count | 128 Count | 0 VDC | 3.82 VDC |
| 1758138004 | 716 Count | 173 Count | 126 Count | 0 VDC | 3.82 VDC |
| 1758137398 | 712 Count | 169 Count | 123 Count | 0 VDC | 3.82 VDC |
| 1758136793 | 709 Count | 166 Count | 121 Count | 0 VDC | 3.82 VDC |
| 1758136188 | 706 Count | 164 Count | 119 Count | 0 VDC | 3.82 VDC |
| 1758135582 | 702 Count | 161 Count | 116 Count | 0 VDC | 3.82 VDC |
| 1758134977 | 699 Count | 156 Count | 114 Count | 0 VDC | 3.82 VDC |
| 1758134372 | 697 Count | 155 Count | 113 Count | 0 VDC | 3.82 VDC |
| 1758133766 | 693 Count | 151 Count | 110 Count | 0 VDC | 3.82 VDC |
| 1758133161 | 690 Count | 146 Count | 108 Count | 0 VDC | 3.82 VDC |
| 1758132556 | 687 Count | 144 Count | 106 Count | 0 VDC | 3.82 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)