This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Presaure* | Power* | Value5* |
|---|---|---|---|---|---|
| 1758210401 | 22.93 C | 26.08 %RH | 983 hPa | 5.67 V | 0 |
| 1758210397 | 22.95 C | 25.8 %RH | 983 hPa | 5.68 V | 0 |
| 1758210097 | 23.07 C | 25.61 %RH | 983 hPa | 5.6 V | 0 |
| 1758209801 | 22.76 C | 25.47 %RH | 983 hPa | 5.61 V | 0 |
| 1758209797 | 22.76 C | 25.47 %RH | 983 hPa | 5.61 V | 0 |
| 1758209497 | 23.37 C | 25.26 %RH | 982 hPa | 5.66 V | 0 |
| 1758209203 | 23.55 C | 24.68 %RH | 982 hPa | 5.66 V | 0 |
| 1758209197 | 23.55 C | 24.68 %RH | 982 hPa | 5.66 V | 0 |
| 1758208897 | 23.67 C | 24.81 %RH | 982 hPa | 5.64 V | 0 |
| 1758208601 | 24.1 C | 23.91 %RH | 982 hPa | 5.63 V | 0 |
| 1758208597 | 24.1 C | 23.91 %RH | 982 hPa | 5.63 V | 0 |
| 1758208297 | 23.77 C | 24.23 %RH | 982 hPa | 5.62 V | 0 |
| 1758208001 | 23.78 C | 24.03 %RH | 982 hPa | 5.66 V | 0 |
| 1758207997 | 23.78 C | 24.37 %RH | 982 hPa | 5.61 V | 0 |
| 1758207697 | 24.18 C | 24.14 %RH | 982 hPa | 5.65 V | 0 |
| 1758207401 | 24.87 C | 23.44 %RH | 982 hPa | 5.65 V | 0 |
| 1758207397 | 24.87 C | 23.44 %RH | 982 hPa | 5.65 V | 0 |
| 1758207097 | 24.29 C | 23.75 %RH | 982 hPa | 5.67 V | 0 |
| 1758206801 | 23.81 C | 24.03 %RH | 982 hPa | 5.61 V | 0 |
| 1758206797 | 23.81 C | 24.03 %RH | 982 hPa | 5.61 V | 0 |
| 1758206497 | 24.63 C | 22.85 %RH | 982 hPa | 5.61 V | 0 |
| 1758206201 | 24.55 C | 22.59 %RH | 982 hPa | 5.67 V | 0 |
| 1758206197 | 24.55 C | 22.59 %RH | 982 hPa | 5.67 V | 0 |
| 1758205897 | 24.72 C | 22.74 %RH | 982 hPa | 5.66 V | 0 |
| 1758205601 | 25.21 C | 22.42 %RH | 983 hPa | 5.64 V | 0 |
*Used Equation Coefficients:
Temp: 0, 0.01, 0
Humi: 0, 0.01, 0
Presaure: 0, 1, 0
Power: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)